ISXOgre - User contributions [en]

Tab:Grind Options

2011-09-05T23:31:20Z

Xionnae: /* Auto Load Grind Options */

== Auto Load Grind Options ==

----

'''''Summary'''''

Various heroic encounters are very difficult for a bot group to do because of special scripting. Using this option will enable any special coding that is in place for mobs. Below is a list of special coding in place, and how to use them.

'''''Mobs'''''
*Vethilot the Corpsemonger
**You automatically click the corpses
* Royal Palace of Erudin
** Lord Primarch of Erudin
*** Anytime "an unstable rift" is near, you will right click and diffuse it (does not change your target).
* Zraxth's Unseen Arcanum
** Anathraxxis
*** Have your tank stand by the flag against the wall in the center. Put all your casters near one of the flower pot looking things. They will be around max heal range. Use campspot on anyone you want to move (I personally use CS-JO-JI, this allows melee to fight).
*** When he calls out an ooze, the bot will change your current campspot to which ever flower pot is further away from the ooze. Your tank should never need to move (assuming if the ooze spawns on him, you can heal through it).
*** Note: This sets the camp spot coordinates, it does NOT TURN IT ON. Meaning if you do not active camp spot on someone, this has no effect (which is what you want for your tank).
*** The only thing you will need to do "manually" is ensure you keep your tank in heal range from knockbacks, and don't let him frontal your group.

Tab:Grind Options

2011-09-05T23:30:02Z

Xionnae:

OgreBotCommands

2011-09-05T23:20:52Z

Xionnae:

== Ogre Bot Commands ==

'''Bot Commands''' - Note: For the most up to date information, type "Ogre ?" or "Ogre help" in the console.
* ISXOgre commands
** ext ISXOgre - Loads the Ogre extension.
** ogre login <charactername> - will log on <charactername> and the bot will not be loaded.
** All of the following commands load the live version of Ogrebot (adventure bot).
*** ogre - loads the bot for the character that is already logged in.
*** ogre <charactername> - loads the character (will /quit out if on a different character) and loads the bot for that character once they are logged in.
*** ogre pause - loads the bot for the current character - bot is paused.
*** ogre pause <charactername> - Will log on <charactername> and load the bot paused.
** All of the following commands load the development version of Ogrebot (adventure bot).
*** ogre dev - loads the bot for the character that is already logged in.
*** ogre dev <charactername> - loads the character (will /quit out if on a different character) and loads the bot for that character once they are logged in.
*** ogre dev pause - loads the bot for the current character - bot is paused.
*** ogre dev pause <charactername> - Will log on <charactername> and load the bot paused.
** Ogre x2 -- Loads the on screen display of when KageZonn has the buff.
** Ogre OSA | OnScreen -- Loads the On-screen-Assistant (OSA)
** Ogre Spell | SpellExport -- Runs spellexport - Used for adding spells to OgreBot
** Ogre OgreMCP || MCP -- Loads OgreMCP (Previously known as Uplink)"
** Ogre Harvest -- Loads EQ2OgreHarvest
** Ogre OP -- Loads Ogre Portal UI (Not sure this still works)
** Ogre Tell -- Loads the Uplink tell window. Note: This is built into Ogrebot already. This Command is a standalone version.
** Ogre Map | Mapper -- Loads the OgreNav mapper.
** Ogre Move <string location> | Movement <string location> -- Runs movement script with the arg of location using OgreNav
** Ogre Hire <tier> | Hireling <tier> -- Loads the hireling script for Guild Hunter/Gatherer/Miner - Default tier is 9
** Ogre HireG <tier> | HirelingGroup <tier> -- Loads the script for using multiple hirelings - Default tier is 9
** Ogre HireX <tier> <options> -- Loads the script for using 1 toon to collect multiple guild hirelings, then deposit them. Default options are tier 9 and both -h (hireling) and -d (deposit). You may do "ogre hirex 9 -h" for hirelings only.
** Ogre Depot -- Loads the Depot script
** Ogre Transmute -- Loads the Transmute UI
** Ogre Reset | Zone -- Loads the Zone reset UI
** Ogre Hyptia - Loads an onscreen display of when Hyptia is reflecting.

NewUserWalkthrough:Page3

2011-08-11T15:46:08Z

Xionnae: added how to run the bot ;o

<big>'''New User Walkthrough - Page 3: Tips and Tricks'''</big>
----

== Tips and Tricks ==

At this stage you are now ready to use the extension!

When ISXOgre is first loaded, it checks to see if ISXEQ2 is active, if it isn't, it tries to load ISXEQ2 for you.

It also prepares our skin to ensure all our windows are pretty.

For all ISXOgre commands, type: "Ogre ?" or "Ogre help" in the console. This is the most up to date list. There is also a list here on the wiki also. [http://logan.warpigs.us/wiki/ogre/index.php/Main_Page#Commands_and_other_information Click here to go to the ISXOgre Command list.]

One thing you will want to do the first time you run (or before you run) OgreBot on each character, is do a SpellExport. This is a 1 time requirement. It allows the bot to read through each of your spells individually (takes around 5 minutes) and learn about each one, including the little details such as what type of damage it does, or if stealth is required etc. Some "default" spell exports come with the bot, however if you have a different AA setup, the bot may not see those other abilities you have. To do a spell export, type "Ogre Spell" in the console. This, and all other commands can be found in the [http://logan.warpigs.us/wiki/ogre/index.php/Main_Page#Commands_and_other_information Command list.]

Once "Ogre Spell" is finished to run the bot Type "Ogre" into the console.

While you are setting up your character for the first time, read through each tab and what each option does. Remember to read the entire page, there are suggestions at the bottom of some pages. Read everything! While setting up your Guardian or Berserker, you may want to skip past "Heals", I mean, a fighter can't heal right? Depends... is Intercede a heal? What about Dragon Reflexes? Wall of Stone? etc etc (yes they are heals... it wasn't really a question.... :) ).

Version15bugs

2011-08-11T03:30:09Z

Xionnae:

== Version 15 Suggestions! ==

* Change Alias through mcp, specify which relay, which alias, what to change it to
* Allow MCP buttons to run a script
* [FIXED-Raid now will always appear unless raid is not a valid option] All the "raid" option in drop downs even when not in raid.

== General bot ==

* [FIXED] No values in generic profile for Auto Follow distance or move when less than to melee -- Updated. Left at Patch #2 so it doesn't overwrite anyones.
* Grind Options doesn't eat Velithot corpses in SC
* Dol-To-Me crashes Ogrebot with no 'spotmoveto'
* "Call_hme" - Call home button no longer functions

== Setup ==

* [FIXED] "Update Turbo" not reading text box (responds "must use between 20 and 2000 blah blah")

== Priority ==

* [FIXED] pets not showing as targets ("Enable Pets in Dropdowns" checked on Settings tab)
* [FIXED-Probably won't auto-update any existing ones, but anything new saved or edit should display fine.] After switching from something that was a heal or cure to combat it still adds #=1 type things to combat entries

== Aliases ==

* [FIXED-Skips duplicates on the Alias tab] Dropdowns show all duplicate aliases - strictly a visual annoyance but can lead to HUGE dropdown lists for some
* No way to make an alias for a pet? Means no sample pet class profiles!

== Assist ==

* [FIXED] Doesn't currently change when you add multiple assists. If you try to move a later assist before the first it stays on the original assist. Saving and reloading changes the order back to how it was, still leaving you on the original assist.

== Announce ==

* announce text won't accept "#" (ex: 'group cure #1') ((save is cutting off at the #))

== Admin ==

== Dirge ==

* [FIXED] (And renamed "person") "Add Gravitas Person" not updating listbox -- gravitas target? "person" really? :P

== MCP ==

* "Save and reload MCP" under "Setup" doesn't reload MCP

Version15bugs

2011-08-11T02:50:19Z

Xionnae: changed to include lord bob breakage

== Version 15 Suggestions! ==

* Change Alias through mcp, specify which relay, which alias, what to change it to
* Allow MCP buttons to run a script
* [FIXED-Raid now will always appear unless raid is not a valid option] All the "raid" option in drop downs even when not in raid.

== General bot ==

* [FIXED] No values in generic profile for Auto Follow distance or move when less than to melee -- Updated. Left at Patch #2 so it doesn't overwrite anyones.
* Grind Options doesn't eat Velithot corpses in SC
* Dol-To-Me crashes Ogrebot with no 'spotmoveto'

== Setup ==

* [FIXED] "Update Turbo" not reading text box (responds "must use between 20 and 2000 blah blah")

== Priority ==

* [FIXED] pets not showing as targets ("Enable Pets in Dropdowns" checked on Settings tab)
* [FIXED-Probably won't auto-update any existing ones, but anything new saved or edit should display fine.] After switching from something that was a heal or cure to combat it still adds #=1 type things to combat entries

== Aliases ==

* [FIXED-Skips duplicates on the Alias tab] Dropdowns show all duplicate aliases - strictly a visual annoyance but can lead to HUGE dropdown lists for some
* No way to make an alias for a pet? Means no sample pet class profiles!

== Assist ==

* [FIXED] Doesn't currently change when you add multiple assists. If you try to move a later assist before the first it stays on the original assist. Saving and reloading changes the order back to how it was, still leaving you on the original assist.

== Announce ==

* announce text won't accept "#" (ex: 'group cure #1') ((save is cutting off at the #))

== Admin ==

== Dirge ==

* [FIXED] (And renamed "person") "Add Gravitas Person" not updating listbox -- gravitas target? "person" really? :P

== MCP ==

* "Save and reload MCP" under "Setup" doesn't reload MCP